Why the washing machine does not drain water? Effective solutions at home

Washing machines not draining water is a common phenomenon in families using washing machines when there is an error. So can this phenomenon be fixed at home? Let’s find out with Meta Eco Global in the article below.

What is the phenomenon of washing machine not draining water?

Washing machine phenomenon no water

After the washing machine has completed its washing or spinning cycle, water is still left in the drum. This is a sign that the washing machine is not draining water. 

This problem is common on top-loading washing machines. However, some front-loading washing machines occasionally experience this problem. Another sign of this problem is that during the first wash cycle, the washing machine will flash an error light and stop working.

Reasons why washing machine cannot drain water

This phenomenon can be caused by many different reasons. Here are some common reasons why the washing machine cannot drain water:

The exhaust pipe is clogged.

One of the most common causes is a clogged drain due to small objects such as clothes, paper, or jewelry falling into the drain. This prevents the water from draining properly.

Defective drain pump or drain valve

The drain pump or drain valve in your washing machine can fail over time. If they are not working properly, water will not be pumped out.

Water sensor

Some washing machines have a sensor that checks the water level in the water tank. If this sensor is faulty, it may not detect the water level and prevent the washing machine from draining.

Bended or clogged water pipes

If the water inlet or outlet hose of the washing machine is bent or kinked, water may not circulate properly and cause a clog.

Electronic or microchip failure

Some electronic washing machines may have hardware or microchip failures that cause problems during draining.

To determine the specific cause and repair the washing machine when it cannot drain water. You can try checking the above factors or consult a professional washing machine repair technician to ensure safety and efficiency.

How to quickly fix a washing machine that won’t drain

After you have thoroughly researched the causes of the washing machine not draining water, check and learn how to fix a washing machine that does not drain water at home according to the instructions below:

Check the machine’s drain pipe

Check the washing machine drain pipe

After a long time of use, the drain pipe may be dirty. Because of dirt or fibers from clothes, foreign objects such as socks, towels are stuck… At this time, you should clean both ends of the machine pipe to remove all dirt and remove the obstructions outside.

In addition, when the washing machine encounters this situation, it is also due to the drain pipe being twisted or bent. To handle this situation, you should replace it with a new pipe if the pipe is twisted too much or straighten the pipe if possible.

Check the sewage pipe

During the washing machine repair process, the washing machine repair center also encounters many cases where the drain position is higher than the washing machine, causing water to flow back in or not drain out completely.

In this case, you should reposition the washing machine or the drain pipe appropriately. If the drain pipe is still in normal condition, you should check the drain pump system.

Check the washing machine’s drain system

Check the washing machine’s drain system

Top-loading washing machines use a drain valve to drain water from the drum to the outside. If the drain valve does not work, check it in 2 ways as follows:

Remove the filter from the drain valve to clean it with clean water. Because during use, the filter will be covered with dirt, preventing water from draining out.

In case you have cleaned the filter but the machine still cannot drain water, the drainage system may be damaged. At this time, you just need to replace the new drain valve. Depending on each machine model, you should choose the appropriate filter type.

Front-loading washing machines use a pump to drain water out. When this happens, check to see if there is any blockage that needs to be replaced and replace it if necessary.

Through this article, you must have known about the causes and how to handle the error of washing machine not draining water. Don’t forget to follow Meta Eco Global to update more useful knowledge.